Amazon DSP van maintenance: how it works, and how to stay ahead of it
Who tracks preventive maintenance on Amazon vans, what DSPs are responsible for every day, what takes a van off the road, and a routine that keeps vans available and return bills small.
The short version. In a February 2024 letter to Sen. Chris Murphy, Amazon said it works with fleet management companies that give DSPs access to a network of qualified mechanics and track time and mileage intervals to tell DSPs when preventive maintenance is due. A van that is overdue for preventive maintenance cannot deliver, DSPs inspect every van before and after each trip, and a van that fails inspection stays off routes until it is repaired. The DSPs that rarely lose a van by surprise are the ones tracking its condition every day.
Who does what
Amazon set out the division of work in its letter to Sen. Murphy, dated February 9, 2024:
| Job | Who handles it |
|---|---|
| Tracking preventive maintenance | Fleet management companies Amazon works with track time and mileage intervals and notify DSPs when preventive maintenance is due |
| Finding a mechanic | Those fleet management companies give DSPs access to a network of qualified mechanics |
| Daily inspections | The DSP: a pre-trip and post-trip inspection on every vehicle that delivers Amazon packages |
| Keeping unsafe vans off routes | The DSP must not send a driver out in an unsafe vehicle, and Amazon grounds vehicles that do not pass inspection |
| Air conditioning and heat | If the air conditioning is not working, the DSP must take the van out of service; every vehicle must have working heat |
| Paying for upkeep | Amazon says the rates it pays DSPs are calculated to account for insuring, maintaining and operating a delivery fleet |
Who pays for a given repair comes down to the DSP’s own contract. Amazon says DSPs use Amazon-branded vehicles under either a Vehicle Use Agreement or a lease agreement, and that those contracts are not public. DSPs can also run third-party rental vans.
What takes a van off the road
- Overdue preventive maintenance. Amazon says a vehicle that is overdue cannot be used for deliveries.
- A failed inspection. The van can go back on a route only once it is repaired and safe.
- No air conditioning or no heat. Both are contract requirements, not comfort items.
Each one is predictable. Mileage tells you when maintenance is coming, the end-of-shift check tells you what failed today, and A/C complaints usually start as a “weak” note before they become a grounded van.
Damage when vans move or go back
Maintenance is only half of the bill. In September 2025, Transport Topics reported that some DSPs received repair bills of $20,000 or more per vehicle when vans were redeployed to other DSPs or returned, issued by the fleet management companies involved. Amazon used an app called Pave to estimate costs from photos, said it would rely on the app going forward, and gave contractors until Sept. 10, 2025 to contest charges received since April. Whatever the process, a DSP with its own dated photos of every van is in a far stronger position to check a bill. See the lease-return inspection checklist and how to document vehicle damage.
A routine that keeps vans available
- Close out every van at the end of the shift. Tires by wheel, warning lights, A/C, camera, new damage, fuel or charge. The end-of-shift van inspection checklist walks through it.
- Record the odometer at every inspection. Preventive maintenance runs on time and mileage, so knowing each van’s real miles means the due notice is never a surprise.
- Treat warning lights and worn tires as same-day items. They are the defects most likely to become a failed inspection tomorrow.
- Ground with a reason. When a van comes off the road, record why, so dispatch knows what is down and the shop knows what to fix first.
- Keep the invoice with the van. A dated service record helps you check and dispute a duplicate charge at return.
- Photograph new damage the same shift, with the van number in frame and the driver named when you know it.
For intervals by mileage or date, see how to build a preventive maintenance schedule.
Built inside a working DSPMotentra’s DSP profile closes out a van in under a minute, counts oil changes from the odometer at each inspection, tracks fifteen DSP service types and logs damage by body area with photos. $10 per vehicle per month, billed monthly.
See Motentra for DSPsDownload a DSP maintenance planning worksheet
Use one sheet per van to connect its current mileage with upcoming service. Record the last service date and mileage, the interval and its source, the next due point, and who will arrange the work.
Download the maintenance worksheet (PDF)
No email required. The worksheet is a planning aid, not a universal service schedule. Use the manufacturer’s guidance, your lease or fleet program, and qualified service advice for the exact vehicle and duty cycle.
Use mileage to plan ahead
Illustrative calculation: if a service is due at 80,000 miles and the van currently reads 79,650, there are 350 miles remaining. At an estimated 120 miles per working day, the van would reach that point during its third working day. Arrange service before then; update the plan if route mileage changes. These figures demonstrate the calculation, not a recommended oil-change interval.
From inspection defect to completed repair
| Stage | What the fleet team records |
|---|---|
| Reported | Unit number, date, mileage, affected component, inspector’s note and relevant photos. |
| Reviewed | Whether the van must stay out of service, the reason, and who will arrange assessment or repair. |
| Scheduled | Work order, responsible person, booking and target completion date. |
| Completed | What was repaired, completion date and mileage, and supporting service records where applicable. |
| Ready for dispatch | Required review completed, availability updated and the next service point recalculated. |
In Motentra, marking a van out of service creates a work order. DSP inspection camera answers of not working or no camera also create or reuse an unresolved camera work order. That makes the follow-up visible; the fleet team still owns assessment, scheduling and release back to service.
Keep an internal task’s completion separate from whether a shop invoice is required. A completed internal check may have no invoice; a paid repair should retain its supporting records.
See the inspection-to-repair workflowBring your current process to a demo and see how inspections, maintenance tasks and vehicle availability fit together.
Book a Motentra demoExplore fleet maintenance software or pair this worksheet with the DSP end-of-shift inspection checklist.
Frequently asked questions
Who tracks preventive maintenance on Amazon DSP vans?
Can a DSP use a van that is overdue for maintenance?
Who pays for maintenance and repairs?
What happens if a van’s A/C stops working?
How can a DSP avoid big repair bills when a van is returned?
Sources. Amazon’s letter to Sen. Chris Murphy, February 9, 2024; Transport Topics, September 4, 2025. Program details and contracts change; your agreements with Amazon and your fleet partner decide who handles what.